My Brother machine is feeding multiple pages from the ADF

The brother printer once causing faxes, creating copies, or scanning to a laptop. after I send a multi-page fax, a number of the pages don’t seem to be transmitted. What am i able to do? Does this apply to your machine? Click here to seek out out.

Image

Verify that the media utilized in the ADF meets the machine specifications:

  • The ADF will inhibition to thirty five pages.
  • Use 20lb (80 g/m2) media within the ADF.
  • continuously fan the pages before putting them within the ADF
  • humidness ought to be five hundredth to seventieth. Temperature 68°F to 86°F.
  • don’t use paper that’s curled, wrinkled rolled-up, ripped, stapled, paper-clipped, affixed or taped.
  • don’t use cardboard, newspaper or material
  • don’t pull on the document whereas it’s feeding.

make sure that the ADF is being loaded correctly:

  • Press Copy Image
  • Unfold the ADF document output support flap and also the ADF support flap.
  • Fan the pages before putting them within the ADF.
  • Place the documents go about, prime EDGE initial within the ADF till the liquid crystal {display|LCD|digital display|alphanumeric display} display message changes and you are feeling it bit the feed rollers.
  • modify the paper guides to suit the breadth of your document
  • If creating quite one copy, use the dial pad to enter the amount of copies (up to 99).
  • Press Black begin or Color begin.

If the machine feeds unremarkably, the problem ought to be thought-about resolved. Following the rules in Step one ought to facilitate stop future occurrences of the problem. If the machine continues to misfeed or feed multiple pages.

Procedure needs a moist (not WET) artefact. Paper towels can’t be used for the improvement procedure.

  • a. Unfold the ADF document output support flap and also the ADF support flap.
  • b. Open the ADF cowl.
  • c. victimization the damp artefact, conceive to clean the ADF roller at a lower place the ADF roller.
  • d. Clean the separation pad (white color) by lifting the ADF roller assembly (the ADF pad is found at a lower place the ADF roller).
  • e. Once the ADF roller and also the Separation Pad are cleansed, however certain to fully dry each components

NOTE: If the ADF roller and separation pad isn’t fully dried, document jams might occur.

  1. Perform a proof on the machine:

If the brother printer machine feeds unremarkably, the problem ought to be thought-about resolved. Following the rules in Step one ought to facilitate stop future occurrences of the problem. Otherwise please contact US through raise an issue or Live Chat victimization the buttons at the highest of this page. If you need any help related brother printer support without hessitation you can contact us.

Leave a Reply

Your email address will not be published. Required fields are marked *